In combination with Probes or Taurus (sold separately) it allows the installation of the control body at a very long distances from the workstations.


Principle of Operation

Based on the electrical conductivity of the water

Snake is connected to 3 level probes: Common as ground - Min as minimum level - Max as maximum level

The water reaches the weel and the level increases
Snake turns ON the pump when the maximum level probe detects the water
The water level decreases and Snake turns OFF the pump when the minimum level probe doesn’t detect the water anymore

Examples of Applications

Snake + Level Probes

Snake + Taurus

Factory Delay Times





Setting Delay Times

By means of the supplied magnetic key, the customer is able to adjust the delay time of start and stop according to its own needs of use.

Setting Start Delay Time

  1. Disconnect the plug from the electrical system;
  2. Put the magnetic key close to the arrow stamped on the side of the electronic controller;
  3. Connect the plug to turn on the pump;
  4. Hold the magnetic key in position for how many seconds you wish to delay the starting time (maximum 120 seconds);
  5. Once you got the desired delay time, remove the magnetic key.

Setting Stop Delay Time

  1. Connect the plug to the electrical system;
  2. Wait for the pump shutdown;
  3. Put the magnetic key close to the arrow shown on the side of the electronic regulator and the pump starts;
  4. Hold the magnetic key in posion for the seconds necessary to delay the shutdown (maximum 120 seconds);
  5. Once reached the desired time, remove the magnetic key.


Neoprene cables IMQ certified

Available Lenghts

0,70 - 5 - 10 m

Available Types

H07 RN-F 4G1 Ø 9,7mm
(only 1 function) - SPST - N.O.

Power Supply

Made in Italy Motherboards


230Vac 50/60Hz 10A
12/24 Vdc - Vac 10A


Brackets and Supports

Polypropilene Bracket*

tube or wall fixing

Stainless Steel Bracket*

AISI 304

Schuko Piggyback Plug*

The schuko piggyback plug provided with the float switch allows to connect a pump without a switch directly to an electrical socket as to controll the start and stop function.

*Available On Request