Taurus-SiHF

Three watertight chambers level regulator with freely suspended trim variation. Unlike traditional floats that floats on the water surface, the TAURUS thanks to its special construction with integrated counterweight, remains underwater

Patented

 
DRAINAGE PLANTS
PUMPING STATIONS
WASTE WATERs
HIGH TEMPERATURE

How Is Made

A Float Inside Another Float

  1. First watertight chamber
  2. Second watertight chamber
  3. Third watertight chamber
  4. Spherical plastic seal: it augments the structural resistance of the float and weighs on the expanded polystyrene crown cap beneath creating the third watertight chamber
  5. Final thermoplastic sealing: it fuses the various plastic parts together into one single piece.
  6. Expanded polystyrene crown cap: it compresses the metallic grit
  7. Metallic grit
  8. Cable gland
  9. Rubber grommet: tested at 5 bar

Principle of Operation

Used in couple with another of the same type allows you to adjust the levels of minimum and maximum

The tank fillS

High level starts the pump

The tank drains

Low level stops the pump

Examples of Applications

Emptying

Filling

Cables

Neoprene cables IMQ certified

Available Lenghts

10 - 20 m

Available Types

SiHF 4G1,5 - Ø 8,8mm (2 functions - SPDT)

Power Supply

Best European Microswitches

Technical Features

clean contacts support
min 0,1A
min 12/24V

Types

10(8)A 250V for pumps till 1,5HP

Other Features

Temperature

max.+80°C (+176°F)

Depth

max.20m - 65,6ft

Protection Grade

IP 68

Specific weight

0,95 - 1,05 kg/dm³

Accessories

Cable holder

Starfish*

Enables the float switch to be fixed both vertically and horizontally according to user’s need

*Available On Request