![](_media/img/small/mouse-ht-2.png)
Mouse HT
Mouse requires periodic check-ups of its parts.
MAX.+80°C (+176°F)
INDUSTRIAL WATER
CHEMICAL WATER
Principle of Operation
Based on the magnet and the weight
![](_media/img/small/mouse01-2.png)
The tank fills up. The water reaches the maximum level and the whole floating body raises
![](_media/img/small/mouse02-2-2-2.png)
The max level turns the pump ON and the tank drains
![](_media/img/small/mouse03-2.png)
The water reaches the minimum level and the weight of the floating body disengages the magnet
![](_media/img/small/mouse04-2-2.png)
The min. level turns OFF the pump
![](_media/img/small/mouse-on-pump-2.png)
Auto/Manual Switch
It's possible to set the operation of the float in automatic (ON / OFF) or manual (always ON) via the manual switch on the head of the float
![](_media/img/small/mouse-isometrica-2-2.png)
Adjusting the Start and Stop Level
The float is a level controller that allows the user to bring the water levels at certain heights with a minimum and maximum range. It's possible increasing or decreasing the distance between the floating units of maximum and minimum level unscrewing the screws
Shafts
available in different lengths
![](_media/img/large/alberi.png)
Examples of Applications
SPST-NO
![](_media/img/small/mouse-spst-no.png)
Available Electrical connectons
![](_media/img/small/mouse-electrical.png)
![](_media/img/small/mouse-electrical-pump.png)
Technical Datas
Screws: A2
MODEL | NEOPRENE CABLE TYPE | LENGHT (m) | AMP - VOLT - T°C | DEPTH | NOTE |
---|---|---|---|---|---|
MOUSE HT | RN8-F 3G1 SPST-NO - Ø 8,8mm | 0,52 / 2 / 5 / 10 | 10(8)A 250Vac T80 | max.10m (32,8ft) | for pumps till 1,5HP |
Accessories
Brackets and Supports
(* May not be included)
Polipropylene Bracket
![](_media/img/small/staffamouse-2.png)
Stainless steel bracket *
![](_media/img/small/staffainoxmouse-2.png)
Supports
![](_media/img/small/mousetank.png)
Flanged*
![](_media/img/small/supportoflangiato.png)
Threaded*
![](_media/img/small/supportofilettato.png)
Schuko Piggyback Plug*
![](_media/img/small/schuko-piggyback-plug.png)