Taurus-Fep
Three watertight chambers level regulator with freely suspended trim variation. Unlike traditional floats that floats on the water surface, the TAURUS thanks to its special construction with integrated counterweight, remains underwater.
Suitable for immersion in hydrocarbons, medical and scientific
facilities, water purification plants, air conditioning plants.
facilities, water purification plants, air conditioning plants.
PATENTED PRODUCT
Applications:
DRAINAGE PLANTS
PUMPING STATIONS
WASTE WATERSDownload:
Principle of Operation
Used in couple with another of the same type allows you to adjust the levels of minimum and maximum
The tank fills
High level starts the pump
The tank drains
Low level stops the pump
A Float Inside Another Float
- First watertight chamber
- Second watertight chamber
- Third watertight chamber
- Spherical plastic seal: it augments the structural resistance of the float and weighs on the expanded polystyrene crown cap beneath creating the third watertight chamber
- Final thermoplastic sealing: it fuses the various plastic parts together into one single piece.
- Expanded polystyrene crown cap: it compresses the metallic grit
- Metallic grit
- Cable gland
- Rubber grommet: tested at 5 bar
Examples of Applications
SPDT-NO
Double Function - Normally Open: Emptying
SPDT-NC
Double Function - Normally Closed: Filling
Technical Datas
Casing: Polypropylene
Grommet: Viton
Specific Gravity: 0,95 - 1,05 kg/dm³
International Protection: IP68
MODEL | NEOPRENE CABLE TYPE | LENGHT (m) | AMP - VOLT - T°C | DEPTH | ACTIVATION ANGLE | NOTE |
|---|---|---|---|---|---|---|
TAURUS FEP | FEP 4G0.75 SPDT - Ø 8,8mm | 10 / 20 | 10(8)A 250Vac T80 0,1A 12/24V T60 | max.20m (65,6ft) | 20°±5° | for pumps till 1,5HP |
Accessories
Cable holders
(* May not be included)
Starfish
vertical or horizontal tube fixing
Koala
wall fixing with Stainless Steel AISI 316 brackets
