Red Dolphin
Hot water version. Thanks to the new joint , it is possible to connect several filters in sequence.
Filters are delivered already assembled, key tool included.
Filters are delivered already assembled, key tool included.
Patented and European Registered Design
Download:
Pieces: head, nut and glass
Head and Nut: NylonO-Ring: EPDM
pH: 7
MODEL | GLASS | CONNECTIONS | TEMPERATURE | PRESSURE | FLOW RATE (empty filter) |
|---|---|---|---|---|---|
RED DOLPHIN 5" | Nylon 5" | Brass 3/4" or 1" | Max. 80°C (176°F) | Max. 11 bar (160 psi) | Ø1” - 3500l/h ؾ” - 2300l/h |
RED DOLPHIN 10" | Nylon 10" | Brass 3/4" or 1" | Max. 80°C (176°F) | Max. 11 bar (160 psi) | Ø1” - 3500l/h ؾ” - 2300l/h |
Example of application
Municipal plant
The filter is installed before the faucet to clear the water, and after the pressure reducing valve to avoid waterhammer from the outside damage the filter.
with pump
The filter is installed before the pump to preserve the impeller inside the pump.
Available compositions
(Heads of the Double and Triple versions can not be disassembled)
Red Dolphin 5" Single
Red Dolphin 10" Single
Accesories
(* May not be included)
Filter Tool
Key to screw or loosen the filter casing without effort
Wall Support
Support to hang the filter on the wall
O-Ring
O-Ring for filter 88,27X5,34 EPDM
Teflon
Teflon tape rolls 12mm x 12M x 0,075mm to seal the fittings perfectly in order to avoid water leakages
